Oki 390/391 TURBO / N Printer User Manual


 
2 - English
What You Need to Know
The documentation, printer drivers, and network
information are provided on the CD-ROM included with
the printer.
Your printer has a parallel port, a USB (Universal Serial
Bus) port, and a network interface (if your printer has a
network card).
The steps you use to install your printer vary according
to your
selection of port/interface
type of printer (stand-alone or network)
operating system
Product Changes
The product has changed since the publication of the
documentation. The changes are described in this
document.
The documentation for your printer is provided as a
combination of
on-line documentation on the CD
and
hardcopy documentation provided with the printer.
The changes are:
A USB (Universal Serial Bus) port has been added to
the printer.
The CSF (Cut Sheet Feeder) connector has been
moved to the top, back, left-hand corner of the
printer.
The printer menu has additional items.
The maximum receive buffer size is 128 Kbytes.
Locations of Items
1. CSF Connector
2. USB Port
usb_6120e_5.jpg
CSF (Cut Sheet Feeder)
Connecting the CSF
The Cut Sheet Feeder is an option. Two versions are
available: a single-bin and a dual bin.
The Menu Groups you will see when working with the
menu depend on which version of the option you install
with your printer.
The difference between a printer with a USB port and a
printer without a USB port is the location of the CSF
connector.
Printers with the USB port have a CSF connector on
the top, back, left-hand corner of the printer.
You must lift the small door to access the CSF
connector.
Printers without the USB port have a CSF connector
on the back of the printer.
1
2