Filter
Top Products
82 Microline 320/321 Turbo
|
Problem 1:
My word processor files do not print the way I have the
menu and front panel set.
Solution:
Always remember that:
1 Settings in your software application will override any
settings in your printer driver.
2 Your printer driver settings will override any settings from
the printer menu or printer front panel.
Solution:
Before sending a file to the printer, many word processors
send either an “initialization string” or an I-Prime signal to
the printer.
The initialization string contains codes that override the
panel and menu settings. To change your printer to ignore the
reset code, enter the Menu Mode, go to the Set-Up group and
change the setting for Reset Inhibit to Yes. Refer to “Using
Your Printer, Menu Mode.”
The I-Prime signal will automatically override any front
panel settings you have made. To eliminate this problem,
enter the Menu Mode, go to the Parallel Interface group and
change the setting for I Prime to Invalid. Refer to “Using
Your Printer, Menu Mode.”