Oki 14ex Printer User Manual


 
English
User’s Guide 11
Level 2 menu settings
Category Item Parameter Explanation
Print Mode Mode
600 V1200 (600 x 1200)
300
Printing resolution setting in dots per inch (dpi).
Auto Operation
Autocont Off On
The printer can recover from a memory overflow or print overrun automatically after about
15 seconds if set to ON, otherwise Recover key has to be pressed.
Wait Time
Off On
5sec 6sec
90 sec 300 sec
Most computer software will send a form feed character at the end of the print job so that
the last page is ejected. If it does not, the printer can automatically eject the last page after a
period of inactivity.
Man Time
60 sec Off
30 sec
This setting applies to Adobe PostScript operation only. It determines how long the printer
will wait for a sheet to be inserted in the manual paper feeder.
Darkness
Control
Darkness 0;+1;+2;-2;-1
Adjusts internal settings to compensate for variations in humidity. In environments of high
temperature and humidity if some feint printing occurs, increase setting. In environments of
low temperature and humidity if black or white spots appear, decrease setting.
Power Saving
Power
Saving
0sec 8min
Disable
When this function is active, power to the fuser is turned off to conserve energy. A slightly
longer delay will occur before the next job prints, to allow the fuser to warm up again.
Low Toner Low Tnr On Off
This setting determines whether the printer will remain on-line (ON) or go off-line (OFF)
when the toner cartridge has only enough toner left for about 100 pages.
Toner Saving Toner
Disable Medium
Light
Clearable
Warnings
Clr Wrng On Job
Manymessages which may appear from time to time can be cleared by pressingthe Recover
key if this function is ON. If it is set to JOB, the host computer may be able to clear such
warnings by downloaded commands. This setting is not relevant when using PostScript
emulation.
Error Report Erreport Off On
In PostScript mode this setting determines whether an error report will be printed when an
error has occurred.
Parrallel I/F
Speed High Medium
Most modern PCs can download data at very high speed. If data corruption is experienced
on printed pages, reduce the setting to MEDIUM.
Bi-Dirct Enable Disable
The printer can send status information back to the computer. A printer interface cable
compliant with IEEE1284 is needed to use this feature.