Filter
Top Products
3
3
Install the Toner (“Type 7,” OKI P/N 40468801)
4
Make Connections
Place the black end under the
tab (1), then lower the gray
end into the toner well.
Push the lock lever toward
the back of the printer as far
as it will go.
Remove the tape.Shake it
back and forth.
Network Connection (Network models Only):
1
Pigtail (supplied with network models):
Attach to the OkiLAN port (2) and to the printer’s parallel
port (3) .
Note! Do not connect to the printer’s serial port.
4 Ethernet Cable, not supplied
PC: Requires Ethernet cable with two twisted wire pairs and an
RJ45 plug.
Macintosh: Requires Ethernet crossover cable with RJ45
connectors at either end.
Parallel Port (LPT) Connection
(Non-Network Models)
Requires a bidirectional parallel printer cable marked
IEEE 1284-compliant; the cable is not supplied.
!
For more information, see “Interfacing with the Computer” under Printer Controls in the on-line User’s
Guide.
Close the cover.
Unwrap the toner
cartridge.
Serial Port
Power Connection
Plug in the power cord.
1
1
2
4
3