Filter
Top Products
12
OKIPAGE 8p/8w
Loading paper
For best results, use standard laser or copier paper with a Sheffield
rating of 100–250 such as Xerox 4200 (75g/m² or 20lb). The
paper input tray can stack up to 100 sheets of standard paper.
1 Set the left paper guide to the marker for the required
paper size and move the right guide to a position slightly
wider than your paper width.
2 Insert the paper so that it is up against and flush with the
left paper guide.
3 Adjust the right paper guide to fit against the edge of the
paper.
Adjust the guides for a snug, but not tight, fit.
For use of envelopes, transparencies, other print media and
the manual feed slot, refer to the User’s Guide (in some
countries this may be found on the CD).
8pwsgb.P65 24/08/98, 21:5012