Filter
Top Products
THE STATUS MONITOR > 44
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer
to work.
SYSTEM CONFIGURATION MENU
Items Settings Explanation
POW SAVE TIME 5 MIN
15 MIN
30 MIN
60 MIN
240 MIN
Adjusts the idling time before the printer
automatically switches into power saving
mode. In this mode power consumption is
reduced to a low level required to just keep
the printer operating and ready to receive
data. When a job is sent the printer will
require a warm-up time of up to 1 minute
before printing can begin.
CLEARABLE
WARNING
ON
JOB
When ON, non-critical warnings, such as
requests for a different paper size, can be
cleared by pressing the ON LINE button.
When set to JOB, they are cleared when the
print job resumes.
MANUAL TIMEOUT OFF
30 SEC
60 SEC
Specifies how many seconds the printer will
wait for paper to be fed in manual feed
mode before cancelling the job.
WAIT TIMEOUT OFF
5~90~300
Specifies how many seconds the printer will
wait when received data pauses before
forcing a page eject. In PostScript Emulation
mode the job will be cancelled if timeout
occurs.
LOW TONER CONTINUE
STOP
Specifies whether the printer should
continue printing even after a low toner
condition is detected.
JAM RECOVERY ON
OFF
Specifies whether the printer should
perform jam recovery after a paper jam has
occurred. If ON, the printer will attempt to
print again any pages lost due to a paper
jam once the jam has been cleared.
ERROR REPORT ON
OFF
Specifies whether to print an error report
when an internal error occurs.