Filter
Top Products
3
Outline
Back panel
Connectors
TEL Connects a conventional
analogue telephone or G3
facsimile machine. Dial signal:
DTMF signaling only.
LINE Connects to an analogue
public telephone line.
PC* Connects to a PC via a straight
cable (category 3 or higher).
Not for Maintenance Console
Software. Use category 5 for
100BASE-TX.
LAN* Connects to LAN via a cross
cable (category 3 or higher).
Use a straight cable for HUB
connection. Use category 5 for
100BASE-TX.
CONSOLE Connects to a PC (serial port)
for data setup. Use an RS232C
connector cable (straight).
FG Terminal strip for frame
ground.
DC IN 12V Connects an AC adapter.
The communication performances of the LAN and PC ports are always the same and
VoIP-TA conforms to the lower of the two. When either the PC or LAN port is 10
BASE-T, both ports are set to 10 BASE-T communication. If a PC is connected to the
PC port during a call, the call may be interrupted for approximately one second.
Please avoid such usage.
*