Filter
Top Products
hold the default reset button then turn on the router's power, until the system LED lights up
(about 3 seconds). Last, release the reset button and wait for the router to reboot.
Note: Ensure the router is powered on before it restarts completely.
¾ WAN RJ45 port for connecting the router to a cable, DSL modem, or Ethernet
¾ Four LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs
¾ AC power socket: only use the power adapter supplied with the RW400G Wireless
Router, use of a different adapter may result in product damage.
1WAN 2 3 4
RESET
Figure 2-2: Rear Panel sketch
- 3 -