Olympus 145025 Microcassette Recorder User Manual


 
8
Replacing Batteries
The battery indicator on the display changes
as the batteries lose power.
When the batteries are too weak, the recorder
shuts down and “BATTERY LOW” appears on
the display. When appears on the display,
replace the batteries as soon as possible. AAA
alkaline batteries are recommended.
Notes
Be sure to stop the recorder before replacing the
batteries. Unloading the batteries while the recorder
is recording, erasing or otherwise accessing an audio
file may corrupt the file.
Be sure to replace both batteries at the same time.
Never mix old and new batteries, or batteries of
different types and/or brands.
• If it takes longer than 3 minutes to replace dead
batteries, you may have to reset the time when you
load fresh batteries.
Remove the batteries if you are not going to use the
recorder for an extended period of time.
Using the AC Adapter
F
O
L
D
E
R
/M
E
N
U
INDEX
P
L
A
Y
S
T
O
P
E
R
A
S
E
Inserting Batteries
Inserting Batteries/Replacing Batteries/
Using the AC Adapter
“BATTERY LOW”
1
Slide open the battery cover.
2
Insert two AAA alkaline batteries,
observing the correct polarity.
3
Close the battery cover completely.
Plug the optional AC adapter
(Olympus Model A321 or
A322) into household power
outlet and connect the power
plug to the recorders power
connector (DC 3 V) as shown in the illustration.
Always stop recording before connection.
Otherwise it may not be possible to play back
the voice data being recorded.
• Always stop recording before connection or
disconnection.
When not using the recorder, always disconnect
the AC adapter from the power outlet.
Use only the correct power supply voltage as
indicated on the adapter.
Do not use the AC adapter when connecting the
recorder to the USB port.