Filter
Top Products
1
15
Charging Battery
1
Connect the optional AC adapter (A511/D-
7AC) or USB cable to the cradle.
When using the adapter for charging, connect the
power plug to the charger’s AC connector.
2
Turn ON the recorder and set it vertically
in the cradle.
CHARGE indicator lamp glows red and the charging
starts.
The lamp goes out when the charging is complete.
..............................................................................................................................................................
Notes
• The Olympus AC adapter (A511/D-7AC) is sold separately.
• Charge the battery often for first few uses. Battery performs better after several full charge/discharge cycles.
• Ni-MH battery pack (BR402) is only chargeable with the Olympus AC adapter A511 or D-7AC.
• If you charge the battery right after charging is complete, it will take only few minutes to charge the battery.
• The PC must be ON when charging battery via the USB cable connection.
• Charging battery via the USB cable connection may not be successful depending on the power supply
capacity of your PC. Use the AC adapter instead.
•
If you change the recorder to AUDIO device while charging battery only via the USB cable connection, charging may stop.
• Do not set or remove the recorder from the cradle while it is in operation.
• You can charge the battery while the recorder is in operation.
Charging Battery
You can charge the Ni-MH Rechargeable Battery Pack (BR402) in the recorder when you set the recorder
in the cradle. The battery is usually shipped partially charged. You need to charge the battery before first
use.
AC
connector
The plug type varies
depending on the
country where sold.
AC adapter
AC cable
A511/D-7AC (Optional)
CHARGE
indicator lamp
AC cable