Filter
Top Products
20
1
Inserting and Ejecting a Card
Inserting a Card
1
2
3
Inserting and Ejecting a Card
..............................................................................................................................................................
Note
• If an unformatted card is inserted, the recorder automatically displays the menu to menu format option (☞
P.38).
• Never use any card in the recorder unless it has been formatted on this unit or on a CAMEDIA series Olympus
digital camera (☞ P.38).
1
Slide the card cover lock in the direction
indicated by the arrow.
The card cover is unlocked and the message “CARD COVER
IS OPEN” appears on the display. When this message
appears, the power is switched off automatically.
2
Face the card the correct way and insert it into
the card slot as shown in the diagram.
• Insert the card keeping it straight.
• The card stops with a click when it is inserted all the way.
• Inserting the card the wrong way or at an angle could
damage the contact area or cause the card to jam.
• If the card is not inserted all the way, data may not be
written to the card.
3
Close the card cover securely.
Card inserted fully into the slot
The message “PLEASE WAIT” on the display flashes for
seconds.
Card not inserted fully into the slot
When the card cover is closed, the message “INSERT
CARD” on the display flashes for a few seconds. Pressing
any button will sound beeps* and flash the message
“INSERT CARD” again.
* When the system sounds are enabled.