Filter
Top Products
Page 6
Using the Handyport
Connect the Handyport to the RS232 Serial Com port of the PC with a 9-pin standard serial cable
and connect the power supply (USB lead or separate power pack).
Connect the second Handyport to the data logger with a null modem serial cable LC75 then connect
the power supply (this could be from the same power pack as used with the data logger or a sepa-
rate power pack).
The green LINK led will come on when the contact between the Handyports has been established.
Select the appropriate Serial Com port using the OMEGALOG
®
Communication Wizard. Select the
‘default’ tick box if you wish to always use this setting for communications.
Test connection by selecting Logger Control from the OMEGALOG
®
Assistant.