Filter
Top Products
5.4.7 Counter Interrupt Source Configure
BADR3 + 15 hex
READ/WRITE
CTR1CTRIRINTENXXXXX
01234567
INTEN Enables or disabled interrupts. 1 = enabled, 0 = disabled
CTRIR Enables or disables the counters as an interrupt source. 1 = counters may
generate interrupts. 0 = counters cannot generate interrupts.
CTR1 Controls whether counter 2 is the interrupt source, or counter 1 is the
interrupt source. When CTR1 is set to 1, the interrupt source is counter 2
and counter 1 acts as a prescaler for counter 2. When CTR1 is set to 0,
the interrupt source is counter 1. (Counter 3 is not used.)
17