Filter
Top Products
Installation
OMG-COMM2-EX Page 6
Installation
The OMG-COMM2-EX can be installed in any of the PC expansion slots, but to
access the ‘AT’ or (E)ISA IRQs (10 - 15) it must be installed in one of the 16 bit
slots. The OMG-COMM2 -EX contains several jumper straps for each port which
must be set for proper operation prior to installing the adapter into the computer.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the OMG-COMM2-EX into the slot. Make sure that the
adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.