Filter
Top Products
4
INSTALLATION
Front Panel Controls
1 2 3 4 5 6
1. HDMI INPUT 1
Indicator
2. HDMI INPUT 2
Indicator
3. HDMI INPUT 3
Indicator
4. IR Remote Sensor 5. POWER Indicator 6. SELECT button
Back Panel Connectors
1234567
1. HDMI INPUT 1 2. HDMI INPUT 2 3. HDMI INPUT 3
4. HDMI OUTPUT 5. External IR Remote
Sensor Input
6. RS-232C Remote
Control Port
7. DC Power Jack
Remote Control
Button: Function:
Select the next active HDMI input
Directly select a specific HDMI input
The remote control uses a CR2025 lithium battery. Should
you need a replacement battery, it is usually available from
your local electronics and camera stores.
INSTALLATION
5
Typical Connection
HDMI In
HM-31 Back Panel
HDTV
Game Console Cable Box or DVR DVD Player
HDMI Cable
HDMI Cables
Please follow these simple steps to connect the HMDI Switch:
1. Take an HDMI cable and plug one end into the HDMI INPUT port on your
HDTV or video projector. Plug the other end into the OUTPUT port of the
HDMI Switch.
2. Take another HDMI cable and plug one end into the HDMI OUTPUT port on
your DVD player. Plug the other end into the HDMI INPUT 1 port of the
HDMI Switch.
3. Repeat the above step to connect your Cable Box, Digital Video Recorder
(DVR) or Game Console.
4. Plug the DC +5V output plug of the power adapter into the DC IN jack of the
HDMI Switch. Plug the power adapter into an AC power outlet.
Your HDMI Switch is now properly connected.
Note: The remote control uses infrared light signal and requires direct line-of-sight to
the IR Remote Sensor. Please make sure that the IR Remote Sensor is not blocked.
Otherwise, please use an External IR Remote Sensor connected to the HDMI Switch.