9
• Be sure you plug the adapter into the CTR-115 before you
plug it into the cigarette-lighter socket, and that you unplug
the adapter from the cigarette-lighter socket before you
unplug it from the CTR-115.
Follow these steps to power the CTR-115 from your vehicle’s
cigarette-lighter socket.
1. Set the adapter’s voltage switch to 3 volts.
2. Insert the adapter’s 2.35 mm outer diameter/0.7 mm inner
diameter barrel plug into the adapter’s cord, with the tip set
to positive.
3. Insert the barrel plug into the CTR-115’s
DC IN 3V
jack.
4. Plug the other end of the adapter into the vehicle’s ciga-
rette-lighter socket.
Note:
If the CTR-115 does not operate properly when connect-
ed to a cigarette-lighter socket, unplug the adapter and clean
any ashes and other debris from the socket.
14-1121.fm Page 9 Thursday, July 1, 1999 2:42 PM