Filter
Top Products
20
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
Control Panel.
2. When OSD is displayed, use ◄► keys to select any item in the
main menu. While making a selection on a particular page, press
▲▼ or “ENTER” key on the Remote Control or “Enter” on the
Control Panel to enter sub menu.
3. Use ▲▼ keys to select the desired item and adjust the settings
by ◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “ENTER” key on the Remote Control or “Enter” on the
Control Panel or “Menu” to conrm, and the screen will return to
the main menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Setting
Sub Menu