Filter
Top Products
Menu Setting
40
Lamp Setting
Press Menu to open the OSD menu. Press to move to the OPTIONS menu. Press to move
up and down in the OPTIONS menu. Select Lamp Setting in the OPTIONS menu. Press
to
change values for settings, and then press Enter to confirm the new setting.
ITEM DESCRIPTION DEFAULT
Lamp Hour Set the number of hours for the lamp to be active. Standard and
bright counter are separated.
–
Lamp Reminder Show or hide the warning message
Note: The lamp reminder warning is only displayed when less
than 30 hours remain.
On
Lamp Mode Select the lamp mode for higher or lower brightness to save lamp
life.
Bright
Lamp Reset Press Enter to reset the lamp life hour after replacing the lamp. See Resetting the
Lamp on page 44.