Filter
Top Products
HD3000 User’s Guide
Professional Video Scaler and Color Management System
HD3000 User’s Guide 52
Output Resolution Selection
HD3000 can use Menu to change the desired output resolution.
1. Press the “Menu” button on the remote to show the Menu.
2. Use “h”, “i” arrow keys to select SYSTEM category, press “Enter” or “g” key to enter this
adjustment category
3. Use “h”, “i” arrow keys to select the “Output Resolution” item (as shown)
4. Press “Enter” key or “g” key to enter this item. The Menu disappears and a sub menu is
shown (as shown below).
5. Use “h”, “i”, “f”, “g” arrow keys to locate the desired output resolution and press
“Enter” to decide the resolution.
6. If the connected device/display can’t support the user-selected output resolution, then
after a few seconds, the option bars moves back to the original output resolution.
7. Once the user selects and decides an output resolution, a confirmation notice is shown.
Enter ”Yes” or “Cancel” to adopt the new selected output resolution, or cancel to return to
the original output resolution.
Note: Not all displays or projectors are capable of receiving and displaying their
complete list of resolutions. Please refer to the documentation that came with
your projector or display for the exact compatibility match. Certain versions of
the HD3000 have been factory preset for a single output range.