Filter
Top Products
4
EN
SAFETY AND CARE
SAFETY PRECAUTIONS
Please observe the following safety precautions when
setting up and using this product.
z LCD panel - The LCD panel is made of glass,
and may break if the unit is dropped.
z Heat sources - Keep the product away from
heat sources, such as radiators, stoves, heaters,
and other heat-generating products.
z Water and moisture - Do not use the product in
or near water or in high moisture areas, such as
a bathroom.
z Power source - The product may be susceptible
to power surges. It should be unplugged during
severe storms or whenever you will be away
for a long time. Only use the type of power
source specified in this manual. Do not overload
power strips and extension cords, as this can
cause a fire hazard.
CARING FOR THIS PRODUCT
To ensure you receive the maximum benefit from
using this product, please observe the following
guidelines.
z Do not clean any part of the product with
benzene, thinner or other solvent chemicals -
this may cause permanent damage that is not
covered by the guarantee. When necessary,
clean it with a damp cloth.
z Keep your product away from hot, humid
conditions or strong sunlight.
z Every effort has been made to ensure the
highest standards of reliability for your wall
clock with remote nightlight. However, if
something does go wrong, please do not try to
repair it yourself - consult your supplier.
z Do not use your product outdoors in the rain, or
handle it with wet hands - water can damage
electrical equipment.
GETTING STARTED
HOW YOUR CLOCK WORKS WITH THE
NIGHTLIGHT - OVERVIEW
z The clock can be set independently to give you
time, calendar and alarm facilities.
z The nightlight can be set independently to light
up in the dark so you can see where you are
going.
z The clock and nightlight can also be used
together to turn the clock backlight on when you
walk into a dark room, or wave your arm from
the comfort of your bed. It can do this because
the nightlight has 2 types of sensor. One
sensor responds to light and the other responds
to movement. From the clock unit you can set
these sensors to be active during a certain
period of time.
PACKAGE CONTENTS
When you unpack your wall clock with remote
nightlight, make sure you keep all the packing materials
in a safe place, in case you need to later transport the
device or return it for servicing.
In the box, you will find:
z Clock Unit
z Remote Nightlight
z 4 x UM-3 / AA 1.5V Batteries for the Clock
z 3 x UM-3 / AA 1.5V Batteries for the Nightlight
z 4.5V AC Adapter
BATTERIES
The clock uses:
z 4 x UM-3 / AA 1.5V batteries.
The nightlight uses:
z 3 x UM-3 / AA 1.5V batteries.
NOTE It is recommended that you use alkaline
batteries with this product for longer performance.
To install the batteries, simply insert them making
sure they match the correct polarities (+ and -).