Filter
Top Products
6
EN
GETTING STARTED
BATTERIES
Batteries are supplied with this product. Replace them
whenever the low battery signal ( ) displays. Remove the
battery compartment lid on the back of the speakers, and
insert the batteries.
Be sure to match the correct polarity, as shown in the
battery compartment. Before you close the lid, press the
RESET button with the point of a blunt object (such as a
ball point pen).
NOTE Do not use rechargeable batteries.
AC POWER ADAPTER
An AC power adapter is supplied for use with the main
unit. It is recommended for use with the Radio. The jack
is located on the side of the unit.
NOTE If the AC power becomes unavailable, the unit will
automatically switch to battery power.
SWITCH BETWEEN MODES
Press SELECT. The selected mode will flash. The display
will stop flashing if no key is pressed within 5 seconds.
CHANGE SETTINGS
Press and hold SELECT for 2 seconds. Then, press UP
or DOWN to change each setting. Press SELECT to
switch between options.