Oregon Scientific PS-S03 Clock User Manual


 
8
EN
SET OR CHANGE THE CLOCK
1. Press SELECT to switch to the Clock Mode. The
time will flash.
2. Press and hold SELECT for 2 seconds to enter the
setting mode.
3. Select the 12/24-hour format, hour, and minute.
Press UP or DOWN to change the setting. Press
SELECT to confirm.
ALARM
When activated, the Beep alarm starts quietly, then
gradually becomes louder. It shuts off after two minutes.
The LCD display lights up for the first 8 seconds.
The Radio alarm turns on the Radio automatically. It will
turn off after 2 hours.
SET ALARM
1. Press SELECT several times until the Alarm area
flashes.
2. Press and hold SELECT for 2 seconds to enter the
setting mode.
3. Select the hour, minute, and alarm type ( for Beep
Alarm or for Radio Alarm). Press UP or DOWN
to change the setting. Press SELECT to confirm.
If you choose , use the radio control buttons to
select the AM/FM band, radio station and volume
level ( 11).
4. Press SELECT again when you are finished.