Filter
Top Products
User’s Guide and Reference 4 - 41
Modem Command Reference
S32 — XON Character
Range 0-255
Default 17
Sets the value of the XON character.
S33 — XOFF Character
Range 0-255
Default 19
Sets the value of the XOFF character
S36 — LAPM Failure Control
Range 0-7
Default 7
This register is used when the S48 register contains the value 128 and an
attempted error correction link fails. These fallback options are initiated
immediately upon connection if S48 = 128.
If an invalid number is entered, the number is accepted into the register,
but S36 will act as if the default value is entered.
The S36 actions are:
S36 = 0 Modem disconnects.
S36 = 1 Modem stays on-line and a Direct mode connection
is established.
S36 = 2 Reserved.
S36 = 3 Modem stays on-line and a Normal mode
connection is established.