Filter
Top Products
21
EXTERNAL INPUT TERMINALS / CONNECTING THE POWER CABLE / ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
1 Turn the plasma display over and place it
screen-first onto a table which has a soft cloth
draped over it.
Place the plasma display in a way so that the
stands hang over the edge of the table.
NOTE:
• Make sure to use a table which can support the
weight of the plasma display and is larger than the
plasma display.
• Make sure the table is in a stable location.
2 Remove the stands from the plasma display.
Unscrew the M5 screws indicated by , and
remove the left and right stands.
3 Attach the left and right TV rails to the plasma
display using the M8 screws included with the
wall mount kit.
indicates the position of the screw holes on
the plasma display
4
Attach the plasma display to the wall.
NOTE:
• Refer to the instruction manual included with the
wall mount when securing the plasma display to
the wall.
2
1
A
TTACHING A WALL MOUNT BRACKET
(SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the plasma display.
When performing this operation, refer to the instruction manual included with the wall mount
kit.
2
Stand
Plasma Display rear
1
1
#
CAUTION
•Any damage caused by incorrectly attempting to mount the plasma display is not covered under the
terms of the manufacturers warranty.
NOTE:
• The screws and stands you have removed are nec-
essary for reattachment at a later date. Make sure
to keep them in a safe place.
NOTE:
• Only use the screw holes indicated by for
mounting the plasma display.
•For instructions on how to attach the TV rails, refer
to the instruction manual included with the mount
wall kit.
2