Filter
Top Products
33333
Packard Bell Grafite & Carbon Disassembly Manual
3
Front Cover
Perform the following steps to remove the front cover:
1. Make sure the power is off.
2. Turn the device upside down.
Note:
Use an anti-static mat or something soft like a piece of cloth underneath the device to prevent damage to the
exterior of the casing.
3. Insert a flat-blade screwdriver in the 2 orifices to release the front cover and slide the cover
up and out of the compartment.
Fig. 1 Removing the front cover.
Top Cover
To remove the top cover, first remove the front cover (see Front Cover on page 3) and then perform
the following steps:
1. Turn the device over so the top is facing up.