Filter
Top Products
44444
Packard Bell Grafite & Carbon Disassembly Manual
4
2. Slide the top cover to the front of the device and remove the cover.
Fig. 2 Removing the top cover.
Hard Disk Drive
To remove the hard disk drive, first remove the front cover (see Front Cover on page 3), remove the
top cover (see Top Cover on page 3), and then perform the following steps:
1. Remove the 4 screws (2 on either long side) securing the hard disk drive in the device.
Note:
One of the screws on each side of the hard disk drive holds a spacer clip.
Fig. 3 Removing the hard disk drive screws.
Note:
In
Fig. 3
only 2 screws are visible; the other 2 screws are located on the other side of the hard disk drive.