Packard Bell LJ65 Laptop User Manual


 
36 Chapter 2
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
Parameter Description Submenu Items
Advanced CPU
Control
Enter the Advanced CPU Control menu. P-States (IST)
Boot performance mode
Thermal Mode
CMP Support
Use XD capability
VT Support
SMRR Support
•C-States
Enhanced C-States
C-State Pop Up Mode
C-State Pop Down Mode
C4 Exit Timing Mode
Deep C4
Hard C4E
Enable C6
•EMITM
Bi-directional PROCHOT#
Dynamic FSB Switching
Turbmo Mode
ACPI 3.0 T-States
•DTS
DTS Calibration
Thermal Trip Points Setting
Platform Power
Management
Enter the Platform Power Management
menu.
PCI Clock Run
Break Event Enter the Break Event menu Storage Break Event
PCIE Break Event
PCI Break Event
EHCI Break Event
UHCI Break Event
HDA Break Event
ACPI S3 Enable or Disable ACPI S1/S3 Sleep State. N/A
Wake on PME Disable or Enable wake up when the
system power is off and a PCI Power
Management Enable wake up event occurs.
N/A
Wake on Modem
Ring
Disable or Enable wake up when the
system power is off and a modem attached
to the serial port is ringing.
N/A
Quickly S4
Resume
Disable or Enable optional quick boot from
S4 Resume.
N/A
Auto wake on S5 Disable or Enable auto wake up by date
and time or at a fixed time everyday.
N/A