Packard Bell LJ75 Laptop User Manual


 
60 Chapter 3
Removing the Primary HDD Module
1. See “Removing the Lower Covers” on page 54.
2. Using the pull-tab, slide the HDD Module in the direction of the arrow to disconnect the interface.
3. Lift the HDD Module clear of the HDD bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
4. Remove the four screws (two each side) securing the hard disk to the carrier.
Step Size Quantity Screw Type
HDD Carrier M3*3 4