Filter
Top Products
Packard Bell oneTwo M3600 AIO Computer Service Guide 17
Power Management Setup
Field Description Value
ACPI Suspend
Mode
Use this item to define how your system suspends. Default value is S3
(STR), the suspend mode is suspend to RAM, i.e., the system shuts
down with the exception of a refresh current to the system memory.
S3 (STR)
S1 (POS)
Power On by RTC
Alarm
Enables or disables the system to wake up from a power-saving mode
when an RTC alarm occurs.
Enabled
Disabled
Power On by
Onboard LAN
Enables or disables the system to wake up from a power-saving mode
when the onboard LAN controller received a network message.
Enabled
Disabled
Wake Up by PS/2
KB/Mouse
Enables or disables the system to wake up from a power-saving mode
when a PS/2 keyboard or mouse is used.
Enabled
Disabled
Wake Up by USB
KB/Mouse
Enables or disables the system to wake up from a power-saving mode
when a USB keyboard or mouse is used.
Enabled
Disabled
Restore On AC
Power Loss
Select the power state when an AC power loss occurs.
• Off - The computer remains off until the power button is pressed.
• Last State - The computer reverts to the last power state before the
power loss occurred.
• On - The computer switches back on after the AC power loss.
Power Off
Power On
Last State