Filter
Top Products
29
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Integrated Peripherals
Item Help
Onboard SATA Controller Enabled
Onboard SATA Mode AHCI Options
Onboard USB Controller Enabled Enabled
Legacy USB Support Enabled Disabled
USB Storage Emulation Auto
Onboard Graphics Controller Enabled
Onboard Audio Controller Enabled
Onboard LAN Controller Enabled
Onboard LAN Option ROM Disabled
↑↓→←：Move Enter：Select +/-/：Value F10：Save & Exit Setup
F1：General Help F9：Load Default Settings Esc： Exit Without Saving
OnBoard SATA Mode (AHCI)
Use this item to select the onboard SATA mode.
OnBoard SATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
OnBoard USB Controller (Enabled)
Use this item to enable or disable the use of USB controller.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect
the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
USB Storage Emulation (Auto)
If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as hard drive. Forced
FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive).
Onboard Graphics Controller (Enabled)
This item enables or disables the onboard graphics controller.
Onboard Audio Controller (Enabled)
This item enables or disables the onboard audio controller.
Onboard LAN Controller (Enabled)
Use this item to enable or disable the Onboard LAN.
Onboard LAN Option ROM (Disabled)
This item enables or disables the onboard LAN option ROM function.
Press <Esc> to return to the main menu setting page.