Filter
Top Products
Basic Operations
15
POWER
CH
CH
VOL
VOL
+
-
P.M
AUTO.ADJ
DSP
0
8
7
4
5
1
2
3
6
9
-
/
--
MENU
C.SYS
ZOOM
CLK
SLP
EXIT
1
2
1
2
Connect the power correctly, then the red indicator lights up and the
unit is in STANDBY mode.
Press the POWER ( ) button on the remote control or on the unit
to turn on the TV set. The indicator will turn to yellow.
With the power on, press the POWER ( ) button to turn off the
TV and the TV is in STANDBY mode, the indicator will turn to red.
If you want to turn off the power completely, unplug the power
cord from the wall outlet.
Note: Do not switch the on/off state of the unit quickly. The interval of
the turning on and turning off should be more than 5 seconds.
Press the SOURCE button on the unit or
button on the remote control. The screen
displays the menu as shown on the right.
Press CH to highlight your desired
input signal source. Press VOL+/- or wait
for about 4 seconds and the desired signal
source will be selected.
Note: All buttons shown in the manual are located on the
remote control unless otherwise indicated.
1
2
Turning on
Turning off
Selecting input signal