Filter
Top Products
40
Chapter 2 More Menus Features
Chapter 2
More Menus Features
2-Sided Copy Mode
zFor information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, please refer to the Operating Instructions (For
Basic Operations) on the provided booklet.
zThe standard setting of the “2-Sided / Original -> Copy” can be changed. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
zSpecial paper such as cardboard cannot be used for 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1
Place original(s).
zRefer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
z2 -> 1, 2 -> 2, Booklet, Multi-Size Feed, and
Job Build and SADF: From ADF only.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select the desired 2-Sided mode.
1 -> 1 : To clear the 2-Sided Copy Mode
2 -> 1 : (see page 41)
2 Page : (see page 42)
Booklet : (see page 43)
Multi-Size Feed: (see page 45)
zWhen “Multi-Size Feed” is selected, only
“1 -> 1” can be selected.
Job Build and SADF (see pages 47 and 48)
For N in 1, 1 -> 2, 2 -> 2, and Book -> 2
Modes
zRefer to the Operating Instructions (For
Basic Operation) on the provided booklet.
5
Enter the desired number of copies.
6
Press the Start key.
zWhen copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
zAfter finishing copying, press the Reset key
to return to the initial screen of the current
active mode.