Filter
Top Products
44
Chapter 2 More Menus Features
2 Select a cover type.
zWhen “Blank” is selected as the cover type,
up to 36 originals can be placed on the ADF.
3 Select “Cover” to select a paper.
zWhen changing paper other than the cover,
select the Copy key on the Control Panel. If
the paper of desired size is available on the
tray, the display changes.
Select a paper size from the display.
4
Select “OK” to exit the cover settings.
5
Select “OK”.
zFor the following procedure, refer to steps 5
to 6 of Basic Operation for the 2-Sided
Copy Mode (see page 40).
zWhen the Fold Position does not match with
the center position of the copies, set the
binding margin. Refer to General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
zThe stapled copies are delivered to the
saddle tray of the 1-bin saddle finisher as
shown below:
Blank Not copied on the cover.
Copy Copied on the cover.
Staple position
Saddle tray