Filter
Top Products
9
VQT5C27
Operations Getting started
Turn on the TV and select the correct video
input.
Press ^.
Place a disc or connect a USB device.
• If this unit is not switched to the USB mode
when connecting the USB device, press
USB and press w q to select the item.
Press e r w q to select the item and press
OK.
• Depending on the disc, playback may start
automatically.
(JPEG only)
• When you press PLAY/PAUSE q/h instead
of OK, you can start the slide show.
Stopping playback
Press STOP g.
The stopped position is memorized.
Power Resume function
Press PLAY/PAUSE q/h to restart from this
position.
This position is memorized even after power
outage (Power Resume). However, if the
restart position is misaligned or depending on
the media and playback conditions, the unit
may not operate normally.
NOTE
• Screen saver will start automatically if the media
playback is stopped and the menu is closed for about
5 minutes.
• The player will automatically switch to Power Standby
mode if you do not press any buttons for about
25 minutes after the media has stopped playing.
• During playback of DTS source, there will be no sound
from the speakers. Select a different audio source (e.g.
Dolby Digital).
(DVD-S700 only)
Or please connect the unit to an AV receiver that can
decode DTS via an HDMI terminal, and set “Audio
Out” to “Bitstream” (
page 12).
Playback
(For the United Kingdom, Ireland, Eastern
Europe and South Africa only)
Displaying subtitles text
You can display subtitles text onto the Xvid
video disc on this unit. This function has no
relation to the subtitles specifi ed in Xvid standard
specifi cations and has no clear standard. The
operation might be different or it may not operate
properly depending on the way the fi le was made
or the state of this unit (playing, stopped, etc.).
If the subtitle does not appear correctly, change
the subtitle language (
page 11).
Playback Control guide