Filter
Top Products
Customizing Your Machine
83
Fax Parameter Table
Programming
Your Machine
156 PRINT FORWARDED
DOCUMENT
1 Inc. Only Selecting whether a memory received fax or email to be
forwarded is always printed or only when forwarding is
incomplete.
2Always
157 TRANSACTION
JOURNAL
1 Invalid Selecting whether the machine sends a transaction journal
to the pre-programmed email address.
2Valid
158 PC REMOTE
UPDATE
1 Invalid Selecting whether the machine will accept commands from
an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto Dialler
(c) Allow retrieval of the Journal
2Valid
159 SUBJECT LINE
ENTRY
1 Invalid Selecting whether the "Subject" line can be programmed
during each transmission.
2Valid
160 DEFAULT DOMAIN 1 Invalid Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number Dialling.
2Valid
161 DNS SERVER 1 Invalid Selecting whether to use the DNS Server for the Internet
communication.
2Valid
162 TIFF VIEWER URL 1 None Selecting whether to include the URL address in the email
message body.
2English
3English+
Japanese
163 ROUTING HEADER 1 Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed pages.
2Valid
164 IFAX XMT HEADER
(Email only)
1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is useful
when using the machine to scan documents back to your
PC)
Note: When sending to a Domain other than as specified
in the Default Domain parameter, the header will be
included regardless of the selection.
2 Not Included
169 DHCP CLIENT 1 Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such as
IP Address, Subnet Mask, Default Gateway IP Address,
etc.)
Note: If you change the setting of this parameter, the
machine will reboot automaticaly.
2Valid
170 SMTP
AUTHENTICATION
(See Note 3)
1 Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication with a user name and
password before accepting email. After change the setting
to "Valid", you can enter the user name and password
assigned to your machine by your network administrator.
2Valid
171 POP BEFORE SMTP
(See Note 3)
1 Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication by first retrieving incoming
email from the POP Server before accepting email.
(Please consult with your network administrator).
2Valid
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...