Filter
Top Products
19
Loading Documents on the Flatbed
One sheet or an entire book document can be scanned on the document glass.
Scanning documents in this way is known as “scanning with the flatbed”.
Caution
≥ Do not place floppy disks or any items containing magnetic data strips on the flatbed. Magnets are located in the
flatbed cover (flatbed sheet) and may damage data stored on floppy disks and magnetic strips.
∫ When scanning with the flatbed
1
Raise the hopper tray.
2
Open the document cover.
3
Place the scanning side of the
document face down on top of the
flatbed glass towards the upper left
corner.
≥ If the document is bent or folded,
straighten it.
4
Match the shorter side of the document
with the left edge of the flatbed glass.
5
Match the longer side of the document
with the standard mark.
≥ If the document is slanted, it will not be
scanned properly.
Document cover
Hopper tray
Document
Standard
mark
Standard mark
Document
Longer side
Shorter side
Flatbed glass