Filter
Top Products
32
How to re-attach the sensor rollers
If the sensor rollers are removed, re-attach them.
∫ Re-attach the sensor roller for back scanning to the ADF door
Attach the shorter sensor roller to the ADF
door by placing the non-gear side to the ADF
door release.
≥ Match the groove to the guide.
≥ Push the roller, and confirm the sensor is locked
by the springs on both sides.
∫ Re-attach the sensor roller for front scanning
Attach the longer roller to the unit by placing
the non-gear side to the ADF door release.
≥ Match the groove to the guide.
≥ Attach the side of the ADF door release first, and
attach the other side.
Confirm both rollers move slightly.
≥ Press down on the sensor rollers and rotate them.
Springs