Filter
Top Products
Feature & Display
Features Summary
74
Code Settings How the unit operates
#41
Changing the fax activation code
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 52).
FAX ACTIVATION
MODE=ON [±]
ON /
CODE=
??
9
OFF
1.
Follow steps 1 and 2 above.
2.
Press + or -
to select “ON”.
3. Press
w
.
4. Enter your code from 2 to 4 digits,
using 0–9 and :.
5. Press
w
.
6. Press
p
.
●
Do not enter “0000”.
(The default setting is in bold type.)
If you hear slow beeps, press
LM or ç
and listen to recorded messages
(p. 59, 60). The beeps will stop.
#42
Setting the message alert
To alert you with beeps when a
new voice message is recorded.
MESSAGE ALERT
MODE=OFF [±]
ON
OFF
If you hear slow beeps, erase the
recorded messages (p. 59, 60, 66).
The beeps will stop.
#43
Setting the recording time alert
To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
REC. TIME ALERT
MODE=OFF [±]
ON
OFF
How to set menu options
Note:
●
Step 3 may be slightly different depending on the
feature.
●
See page 69 for more details.
Programming table (cont.)
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Advanced features (cont.)!
#44
Setting the memory reception
alert
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
RECEIVE ALERT
MODE=ON [±]
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
ON
OFF