Filter
Top Products
– 41 –
Fax/Copy
(all calls are received as faxes)
FAX ONLY mode
Activating the FAX ONLY mode
Turn on the AUTO RECEIVE mode by pressing
until the FAX indicator light turns on.
●
The display will show the following.
Display:
●
If the AUTO RECEIVE setting is set to the EXT.TAM
mode, reset it to the FAX ONLY mode (see page 46).
●
The unit will automatically answer all calls and only
receive fax documents.
●
The number of rings before a call is answered can be
changed (see below).
FAX ONLY MODE
AUTO RECEIVE
FAX
AUTO RECEIVE
ON
This setting determines the number of rings before the unit answers a call in the FAX ONLY mode.
You can choose from 1 to 4 rings.
Helpful hints:
●
To answer a call before the unit does, increase the number of rings.
●
If you have difficulty receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
1
Press .
Display:
2
Press , then .
3
Press .
4
Press or to select the desired number.
5
Press .
6
Press .
MENU
SETUP ITEM
[ ]
START/COPY/SET
RING=1
▼ ▲
START/COPY/SET
FAX RING
0 7
1.SYSTEM SET UP
MENU
1 2 3
4 5 6
7 8 9
0
Dial keypad
MENU
START/COPY/SET
Setting the FAX ONLY mode ring count
Receiving Faxes
Note:
●
If you subscribe to a Caller ID service
(KX-FT34 only), set the ring count setting
to 2 or more rings.