Filter
Top Products
Using registration buttons
1 Hub:
Press and hold the registration button
until the LED indicator blinks in green.
R Press and hold the appropriate
registration button (page 10) according
to the device you want to register.
M HANDSET/LOCATORN: For
handsets
M CAMERAN: For cameras
M OTHER DEVICEN: For sensors
and smart plugs
2 Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the device’s registration
button until the device’s LED indicator
blinks in green.
R When registration is complete, the hub
sounds one long beep.
Note:
R If registration fails, the hub sounds several
short beeps.
Using the app
1 Start the [Home Network] app.
2 From the [Home Network] app home
screen, tap [Settings].
3 Tap [Device Registration].
4 Tap [Registration].
5 Select the type of device that you want to
register.
6 Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the registration button on
the device you want to register until the
device’s LED indicator blinks in green.
R When registration is complete, the hub
sounds one long beep.
7 When prompted, configure the device
name and location as desired, and then
tap [OK].
Note:
R If registration fails, the hub sounds several
short beeps.
14
For assistance, please visit www.panasonic.com/support
Setup