• For details about connecting to a LAN, refer to "3.11 LAN Connection"
• For details about connecting peripherals, refer to "3.10.1 Connection of Peripherals"
• For details about System Initialize Switch, refer to "3.13.1 Starting the PBX".
• For details about Reset Button, refer to "5.1.4 Using the Reset Button".
• Portions of this product contains software of Datalight, Inc. Copyright 1993–2000 Datalight,Inc., All
Rights Reserved.
WARNING
A
lithium battery is used in the IPCMPR card. There is a risk of explosion if the battery is replaced
with the incorrect type. Dispose of used batteries according to the manufacturer’s instructions.
CAUTION
• The
SD Memory Card contains software for all the processes of the PBX and all the customer data. It
can be easily removed and taken away from the PBX by a third party. Therefore, do not allow
unauthorized access to prevent data leakage.
• Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause the PBX
to fail to start when you try to restart the system.
• To prevent data leakage, render the SD Memory Card physically unusable before disposal.
Notice
• Use only the SD Memory Card included with the PBX.
• The
SD Memory Card must be inserted in the SD Memory Card slot of the IPCMPR card before startup.
Pin Assignments
MNT Port/LAN Port (10BASE-T/100BASE-TX)
No. Signal Name Input (I)/Output (O) Function
81
1 TPO+ O Transmit data+
2 TPO- O Transmit data-
3 TPI+ I Receive data+
4-5 Reserved – –
6 TPI- I Receive data-
7-8 Reserved – –
LED Indications
Indication Color Description
BATT ALARM Red Battery alarm indication
• OFF: Normal
ON: Alarm
SD ACCESS Green SD memory card status
• ON: Accessing
Document Version 2011-10 Installation Manual 61
3.3.1 IPCMPR Card