Filter
Top Products
19
Night mode Call block
Turn off the night mode
Press (Night mode) for about 3 seconds.
Press (Night mode) for about 3 seconds.
l
“
”
is displayed and lights on.
l
When a call is received during night mode, the unit
will handle the call silently, either by storing the
received fax into memory or by recording the caller’s
message.
l
Night mode allows you to select a block of time
during which the unit will not ring for outside calls
or make sounds when you change the settings.
This feature is useful when you do not want to be
disturbed, for example, while sleeping.
Printing received fax documents
When new faxes are received, the following will be
displayed.
Press (Set) 2 times to print fax documents.
Press (Block) while the unit is ringing or while you
are on an incoming call.
l
The unit announces a message to the caller
2 times, then hangs up automatically. The message
is announced in Japanese and means
“We’re sorry, but your call cannot be connected.”.
For Number Display service subscribers
If you subscribe to Number Display service, the message
heard by the caller will change according to the caller’s
situation.
Example :
If the caller requested not to send caller’s
information,
the message heard by the caller will
change to mean
“Your phone number is blocked by service provider.
Please call again with adding ‘186’ to the beginning
of the phone number.”.
When the following is displayed after pressing
(Block), you can set the unit to block the call from
the same telephone number.
n To block the call, press .
n
To cancel blocking, press
.
l
When the following is displayed,
press to cancel.
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
Press
to listen to recorded messages.
After the messages are played back, the following will be
displayed.
n To erase the messages, press .
n To save the messages, press .
Turn on the night mode Blocking the incoming calls