Filter
Top Products
10
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1Press (Phonebook).
2Press (Search button) repeatedly until the
desired name is displayed.
3Enter the name, up to 12 characters (see the table on
page 9 for instructions).
4Press (Register).
F3
3Lift the handset or press (Speakerphone).
5Enter the telephone number, up to 30 digits.
●
To correct a mistake, press (Clear).
F1
6Press (Register).
F3
7If necessary, enter the group number (1–9).
8Press (Register).
●
To program other items, repeat steps 3 to 8.
F3
9Press (Stop) to exit the program.
Editing a stored name or number
2Press (Search button) repeatedly until the
desired name is displayed.
3Press (Register).
F3
4Edit the name (see the table on page 9 for
instructions), then press (Register).
●
If you do not need to edit the name, press
(Register) and skip to step 5.
F3
5Edit the telephone number, then press
(Register).
●
If you do not need to edit the telephone number,
press (Register) and skip to step 6.
F3
6If necessary, enter the correct group number.
7Press (Register).
F3
F1
F3
2Press (Register).
●
“XXX” shows the number of
remaining stations you can
store.
●
You can program up to
150 stations, including 4
pre-programmed stations.
F3
1Press (Phonebook).
1Press (Phonebook).
F3
F3