Filter
Top Products
18-ENGLISH
Setting-up
Projection methods
In way of installing projector, any one of the following four projection methods
are used. Select whichever projection method matches the setting-up
method. (The projection method can be set from the “OPTION” menu. Refer
to page 52 for details.)
BFront-desk projection BFront-ceiling projection
BRear-desk projection
(Using a translucent screen)
BRear-ceiling projection
(Using a translucent screen)
Menu item Setting
FRONT/DESK
INSTALLATION
Menu item Setting
FRONT/CEILING
INSTALLATION
Menu item Setting
REAR/DESKINSTALLATION
Menu item Setting
REAR/CEILING
INSTALLATION
NOTE:
BYou will need to purchase the separate ceiling bracket (ET-PKB50)
when using the ceiling installation method.
BDo not set up the projector vertically or tilted horizontally, otherwise it
may cause damage to the projector.
BIt is recommended that you set up the projector in a place that is tilted
at less than ±30° vertically. Setting up the projector in places that are
tilted at more than ±30° vertically may shorten component life.