Filter
Top Products
E
NGLISH-39
Adjustments and settings
&Press the
FF
or
GG
button to select an
item, and then press the
II
or
HH
button to adjust the value or change
the setting.
If adjusting the items in the “PICTURE”
and “POSITION” menus, the menu
screen will disappear and only the
selected item will be displayed.
The value and setting indicator will turn
green when any adjustment changes
from the factory set value. For items
without any selective setting or bar
scale, press the ENTER button. The
next screen for the item will then be
displayed.
Unavailable on-
screen menu items
This projector has
unadjustable items and
unusable functions
depending on the signal
being input.
If an item cannot be adjusted
or a function cannot be used,
you cannot select the
corresponding item.
Returning a setting to the factory default
If you press the DEFAULT button on the remote control unit, you can return
settings to the factory default settings. However, the operation of this function
varies depending on which screen is being displayed.
BB
When a menu screen is being displayed
All the items on the sub-menu which is being displayed will be returned to
their factory default settings, and the value and setting indicator will
appear white.
BB
When an individual adjustment screen is being displayed
Only the item displayed will be returned to the factory default setting, and
the value and setting indicator will appear white.
NOTE:
BA triangle symbol below a bar scale
indicates the factory default setting.
Items which do not have this triangle
symbol cannot be returned to the factory
default setting. The positions of the
triangle symbols vary depending on the
type of signal being input.
Indicates the current
adjustment value
Indicates the standard
factory default setting