Filter
Top Products
19
g About the SUB WINDOW
You can compare saved still and moving images or show the Wave Form Monitor (WFM) by using the “SUB
WINDOW” function to separate the main window into 2 displays as shown below.
Depending on the settings of the “SUB WINDOW” (FULL, PART, WFM) in the “SYSTEM CONFIG” menu
(J page 18) it can be switched as shown below.
Every time you press the [FUNCTION1] (or [FUNCTION2]) button (J page 17) assigned to the “SUB WINDOW”
function, the window switches (To use the “SUB WINDOW” function, assign it to [FUNCTION1] or
[FUNCTION2]).
This function compares screens with the same input terminal and same format. If different input formats, or if
signals are input between different input channels, the sub-window (left side, still image) becomes blurred and
blanking occurs. However, if the same format signals are input into the input terminal when acquiring the still image,
the images will be displayed correctly.
•FULL
The main window is reduced and made into 2 sub window (sub window+sub window).
Normal window
(main window)
Before inputting the image
(sub window+sub window)
After inputting the image
(sub window+sub window)
•PART
Only the sub window size is cut out of the main window, and the cut section is made into 2 sub window images
(sub window+sub window).
Normal window
(main window)
Before inputting the image
(sub window+sub window)
After inputting the image
(sub window+sub window)
The central section is cut out Lines up and displays the
section cut out of the main
window
* Only compatible with
HD signals
•WFM
Displays the Wave Form Monitor image
Normal window WFM display
WFM (Wave Form Monitor)
The window is displayed in 16:9 aspect.
Press [FUNCTION1] or [FUNCTION2] once
moving image
P
ress
[FUNCTION1]
or
[FUNCTION2]
once
moving image moving image
P
ress
[FUNCTION1]
or
[FUNCTION2]
once
still image moving image
Press [FUNCTION1] or [FUNCTION2] once
moving image
P
ress
[FUNCTION1]
or
[FUNCTION2]
once
moving image moving image
P
ress
[FUNCTION1]
or
[FUNCTION2]
once
still image moving image
Press [FUNCTION1] or
[FUNCTION2] once
P
ress
[FUNCTION1]
or
[FUNCTION2]
once
Precautions when selecting FULL/PART
Main Menu (continued)