Filter
Top Products
Features Summary
55
A, B, C, D
OFF
#31
Setting the Distinctive Ring pattern
RING DETECTION
See page 40 for details.
Code Feature & Display Settings How the unit operates
(The default setting is in bold type.)
#39
Changing the display contrast
LCD CONTRAST
NORMAL
DARKER
“NORMAL”: For normal contrast
“DARKER”: Used when the display
contrast is too light.
ON
OFF
“ON”: The unit will fit a received
document onto your recording
paper.
“OFF”: The unit will print the
original size.
#37
Receiving other size documents
To receive a fax document that is
longer than your recording paper.
AUTO REDUCTION
#26
Setting the Caller ID list to print
automatically
AUTO CALL. LIST
ON
OFF
“ON”: The unit will print the Caller
ID list automatically after every 30
new calls (p. 24).
#44
Setting the memory reception
alert
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
RECEIVE ALERT
ON
OFF
#41
Changing the fax activation code
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 39).
FAX ACTIVATION
ON /
CODE=
::
9
OFF
1.
Follow steps 1–3 on page 54.
2. Rotate
n
to select “ON”.
3. Press
w
.
4. Enter your code from 2 to 4 digits,
using 0–9 and :.
5. Press
w
.
6. Press
p
.
●
Do not enter “0000”.
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
#68
Setting the Error Correction
Mode (ECM)
To send a fax even if there is static
interference on the telephone line.
ECM SELECTION
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
●
If there are documents in the
memory, clear them before making
the setting (p. 36).