Filter
Top Products
ENGLISH-5
Preparation
4-ENGLISH
Contents
Preparation
IMPORTANT SAFETY NOTICE ...2
Precautions with regard to
safety .........................................5
Accessories .................................9
Before use ....................................9
Location and function of each
part...........................................11
Getting started
Setting-up...................................16
Projection methods, Projector
position, Projection distances,
Setting up range using the lens shift
function
Connections...............................20
Connecting to video equipment,
Connecting to equipment
compatible with HDMI,
Connecting to computer
Preparation for the remote
control unit..............................23
Basic operation
Turning on the power................24
Turning off the power................26
Useful functions
Correcting keystone distortion
...28
Pausing a picture.......................28
Selecting the picture mode.......29
Turning on the button lights.....29
Setting the aspect ratio.............30
Using the COLOR MANAGEMENT
...32
Retrieving the saved picture
settings....................................35
Adjustments and settings
On-screen menus ......................36
Menu screens, Menu operation
guide, Returning a setting to the
factory default
Adjusting the picture.................40
PICTURE MODE, CONTRAST,
BRIGHT, COLOR, TINT,
SHARPNESS, COLOR TEMP.,
DYNAMIC IRIS, ADVANCE MENU,
MEMORY SAVE, MEMORY LOAD,
TV-SYSTEM, SIGNAL MODE,
Projecting sRGB-compatible pictures
Adjusting the position...............44
Horizontal position, Vertical position,
DOT CLOCK, CLOCK PHASE,
ASPECT,AUTO SETUP
Turning off the picture
momentarily (SHUTTER)........45
Changing the display language
...45
Option settings ..........................46
OSD, Noise Reduction (NR),
CINEMA REALITY, BACK COLOR,
WSS, FRONT/REAR,
DESK/CEILING, FAN CONTROL,
LAMP POWER, LAMP RUNTIME
Care and maintenance
When the TEMP indicator and the
LAMP indicator are illuminated
...48
Cleaning and replacing
the air filter..............................50
Replacing the lamp unit............51
Before calling for service..........54
Cleaning and maintenance.......55
Others
Specifications ............................56
Appendix ....................................58
List of compatible signals, General
arrangement of the COLOR
MANAGEMENT menu, Projection
dimensions calculation methods
Dimensions ................................61
Trademark acknowledgements
...62
Precautions with regard to safety
WARNING
If you notice smoke, strange smells or noise coming from the projector,
disconnect the power cord plug from the wall outlet.
BDo not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
BDo not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector in a place which is not strong enough to
take the full weight of the projector.
BIf the installation location is not strong enough, it may fall down or tip over,
and severe injury or damage could result.
Installation work (such as ceiling suspension) should only be carried
out by a qualified technician.
BIf installation is not carried out correctly, there is the danger that injury or
electric shocks may occur.
If foreign objects or water get inside the projector, or if the projector is
dropped or the cabinet is broken, disconnect the power cord plug from
the wall outlet.
BContinued use of the projector in this condition may result in fire or electric
shocks.
BContact an Authorized Service Center for repairs.
Do not overload the wall outlet.
BIf the power supply is overloaded (for example, by using too many
adapters), overheating may occur and fire may result.
Do not remove the cover or modify it in any way.
BHigh voltages can cause fire or electric shocks.
BFor any inspection, adjustment and repair work, please contact an
Authorized Service Center.
Clean the power cord plug regularly to prevent it from becoming
covered in dust.
BIf dust builds up on the power cord plug, the resulting humidity can
damage the insulation, which could result in fire. Pull the power cord plug
out from the wall outlet and wipe it with a dry cloth.
BIf not using the projector for an extended period of time, pull the power
cord plug out from the wall outlet.