Filter
Top Products
38
Setting the network
The settings required for the network must be
established in order to use the web browser (page 46)
functions that the PC uses to control the projector.
HOST NAME : Make alteration if necessary
when to use the DHCP server.
DHCP : Set the DHCP item to ON when
to acquire an IP address
automatically using the DHCP
server.
Set to OFF if DHCP server is not
used.
IP ADDRESS : Enter the IP address if DHCP
server is not used.
SUBNET MASK : Enter the subnet mask if DHCP
server is not used.
GATEWAY : Enter the gateway address if
DHCP server is not used.
MAC ADDRESS : Displays the MAC address
(Media Access Control Address),
which is proper to the network
device.
This function may be needed
when to use the DHCP server.
STORE : The settings are stored in the
memory.
NETWORK
HOST NAME
DHCP
OFF
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
STORE
SELECT RETRNENTER
• Before using the DHCP server, make
sure the DHCP server is already
functioning.
• For details of IP address, subnet
mask, and gateway, ask the network
administrator.
Attention
Connecting the PC
System requirements
The following system specifications are required in
order to use the networking functions.
• PC
OS : Windows XP/2000/Me (Millennium
Edition)/98SE (Second Edition)
CPU : Pentium processor or faster
RAM : 64 MB or more (128 MB or more for
Windows XP/2000)
Web browser: Internet Explorer 6.0 or newer,
Netscape Communicator 7.0 or
newer
• LAN cable
Type : Category 5 compatible straight cable
Length: 100 meters or less
• If you want to use the e-mail function,
make sure the system can handle e-
mail.
Operation is not guaranteed for all
computers that meet the above
conditions.
Connection example
• Touching the LAN terminal with your
hand (or body) when you are carrying
a static charge may damage the
equipment due to a discharge of static
electricity. Therefore, be careful not to
touch the LAN terminal or metal parts
of the LAN cable.
Attention
RGB 2 IN
VD
SYNC/HD
B/P
B
G/Y
R
R/P
SERIAL
REMOTE 1
REMOTE 2
IN
OUT
LAN
DVI-D IN
RGB 1 IN
VIDEO IN
S-VIDEO IN
IN OUT
Personal
computer
Hub
LAN cable
(straight)
LAN cable
(straight)
Projector
10 BASE-T or 100 BASE-TX
Attention