Filter
Top Products
50
Using Web Browser Control
Enter the E-mail address to which the E-
mail is to be sent when two E-mail
addresses are going to be used. Do not
enter it when the second E-mail address
is not going to be used.
Check these boxes when E-mail is to be
sent periodically to two E-mail
addresses. E-mail will be sent at the
times and on the days checked.
E-mail setup page (Continuing)
Select the conditions for sending E-mail.
ERROR:
an error is detected by self-diagnosis.
LAMP RUNTIME: remaining lamp
service time has reached the value set in
the field.
INPUT AIR TEMPERATURE:
intake air temperature has reached the
value set in the field.
Periodic warning interval setting (e-mail
is sent on the checked days of the
week/times)
Enter the E-mail address of your desired
recipient.
Select the conditions for sending the second E-mail.
ERROR: an error is detected by self-diagnosis.
LAMP RUNTIME: remaining lamp service time has reached the value set
in the field.
INPUT AIR TEMPERATURE: intake air temperature has reached the
value set in the field.
Button to update settings
• Only alphanumeric characters, “.”, “_”, “-”, or “@” are available to set an e-mail address.Note